
Add to Cart
ASA5505 Cisco network firewall
Cisco network firewall is a network security device launched by Cisco Systems, mainly used for network security protection and management. It improves network security and reliability by in-depth analysis of network traffic to detect and block malicious attacks and bad behavior.
Cisco network firewall has various functions, including but not limited to:
Rule filtering and access control: Supports filtering and access control of IP address, port, protocol and other conditions, and can control the ingress and egress and transmission direction of traffic to ensure network access security.
Virtual private network (VPN) function: By establishing a VPN tunnel, the network data can be encrypted and transmitted, so as to ensure the confidentiality and integrity of the data.
Network address translation (NAT) function: It can realize network address translation, hide the real IP address of the internal network, and improve network security.
Remote management and monitoring: The device can be managed remotely through the web interface or command line, and network traffic and device status can be monitored in real time.
Cisco network firewall is usually used in the border security protection of enterprises and organizations. It has strong defense capabilities for network intrusion detection, DDoS attack defense, malicious code filtering, and data leakage prevention.
Dimensions (H x W x D) | Non-Operating Temperature |
1.75 x 7.89 x 6.87 inches (4.45 x 20.04 x 17.45 cm) | -13 to 158 F (-25 to 70 C) |
Serial ports | Output Steady State |
1 RJ-45 console | 20W |
Non-Operating Relative Humidity | Input (per power supply) Dual-power supplies |
5 to 95 percent noncondensing | None |
Integrated I/O | Expansion slot |
8-port FE with 2 Power over Ethernet (PoE) ports | 1 SSC |
Memory | System bus |
512 MB | Multibus architecture |
Operating Relative Humidity | Packets per second (64 byte) |
5 to 95 percent noncondensing | 85000 |
Non-Operating Altitude | Operating Vibration |
0 to 15,000 ft (4572m) | 0.41 Grms2 (3 to 500 Hz) random input |
Dual power supplies | Input (per power supply) AC Current |
Not available | 1.8A |
High-availability support | Weight |
Stateless A/S only | 4.0 lb (1.8 kg) with AC power supply |
Concurrent connections | IPS throughput |
10,000; 25,000 | Up to 75 Mbps with AIP-SSC-5 |
Cisco Cloud Web Security users | VLANs |
6 | 3 (trunking disabled) / 20 (trunking enabled) |
Non-Operating Vibration | Maximum new connections per second |
0.41 Grms2 (3 to 500 Hz) random input | 5000 |
Operating Shock | Operating Temperature |
1.14 m/sec (45 in./sec) 1/2 sine input | 32 to 104 F (0 to 40 C) |
Operating Acoustic Noise | New connections per second |
60 dBa max | 4000 |
Integrated ports | Expansion I/O |
8 port 10/100 switch with 2 Power over Ethernet ports | Not available |
Input (per power supply) AC Range line voltage | Weight (with AC power supply) |
100 to 240 VAC | 4.0 lb (1.8 kg) |
Maximum 3DES/AES VPN throughput | Stateful inspection throughput (max) |
100 Mbps | Up to 150 Mbps |
Maximum site-to-site and IPsec IKEv1 client VPN user sessions | Output Maximum Peak |
10/25 | 96W |
Input (per power supply) AC Normal line voltage | Non-Operating Shock |
100 to 240 VAC | 30G |
Operating Altitude | Output heat dissipation |
Designed and tested for 0 to 9840 ft (3000 m); agency approved for 2000 m | 72 BTU/hr |
Maximum Cisco AnyConnect IKEv2 remote access VPN or clientless VPN user sessions | Minimum system flash |
25 | 128 MB |
Input (per power supply) AC Frequency | Power |
50/60 Hz | AC/DC |
USB 2.0 ports | Maximum concurrent sessions |
3 (1 front, 2 rear) | 10,000 / 25,000 |
Form factor | |
Desktop |